Plastcon Group - Baku, Азербайджан

Up to 1200 mm diameter PE 100 pipes

PE 100 plastic pipes is considered to be the beginning of a new stage in the production of polyethylene pipes. These pipes are considered to be the most modern polyethylene (PE) pipes distinguished by high pressure resistance. These pipes have less wall thickness and superior mechanical properties compared to other brands (PE 63, PE 80). Polymer products is able to produce pressure resistant PE100 pipes with a diameter of 16-1200 mm and 6.3-25 atmospheric power.

РЕ 100 pipes are applied in the construction industry in the following areas:

water networks used for underground, surface drinking and technical purposes;sea water discharge systems;water drainage systems;the main lines of the building during the construction of buildings and industrial facilities;construction of trunk and local natural gas lines.
Advantages of PE 100 pipes produced in STP:

durability – PE 100 pipes can be used for 100 years with minimum 50 years warranty;high impact resistance, resistance to cracking;high resistance to chemical influences;resistant to sun rays;manufactured both in inlet (rolled) and in standard sizes;the inner surface is smooth, which minimizes the pellet accumulation during the flow of water;suitable for use in areas where earthquakes and other natural phenomena assets;frost resistant;high pressure resistance (PN4 ÷ PN20) allows pipes to be produced for a wide range of pressure depending on the order.

PPH "Homogen polypropylene" fittings are used to connect pipes to the internal sewerage networks. Since these fittings have high physical and mechanical properties, they are resistant to aggressive environments.

CABLE PRODUCTS
It is one of 6 enterprises manufacturing 500 kW cable of the world. As well, it is the sole manufacturer of the optic cable in the region. The enterprise offers a wide range of cables for the construction sector. Currently, the Cable Plant produces 28 000 varieties of cable. The annual production capacity of the plant is 120 000 tons.

The Cable Plant offers the following products to the construction sector:

installation wires;halogen-free installation wires;connector wires;low voltage power cables;isolation-free power wires;isolation-free air power transmission lines;self-contained, isolated, air power transmission lines;control cabels;flexible control cables;medium voltage power cables (6 kW – 35 kW);high voltage power cables (64 kW – 110 kW);fiber optic cables;LAN and communication cables;coaxial cables.
Detailed information about the manufactured cables can be obtained from the Catalogue on Cable products of STP.

SANDWICH
PANELS
According customer preferences, different colours from “RAL” catalogue can be used. Depending on roof or wall type panels between metal plates applied isocyanate, polyol, pentane and catalyst.The plant equipped with the “Kraus Maffei” production line, this German brand is well known for high quality standards. Production speed for polyurethane is 306 m²/hour, and for rockwoll is 180 m²/hour. The density of polyurethane panels is 38÷42 kg/m³. The rockwoll panels are especially useful in the constructions with high fire risk, as they have high fire resistance.Depending on customer request, the steel sheets in any thickness and colour are applied during production of panels. The width of panels is normally 1 meter and length thereof is 3÷15 meter. The thicknesses of the end product is 50, 70, 100 mm